|
How to assign a PM Task in an equipment?
|
Previous Top Next |
1. From the CMMS dashboard click Equipment. See Figure below.
Figure 1 : Equipment
2. Select an Equipment and click PM Task panel tab.
Figure 2 : Equipment
3. In the Frequency select Monthly. Frequency are : Daily, Weekly, Monthly, Quarterly, Semi-Annual, and Annual. Equipment may have multiple Frequency because every frequency has different PM Task. Here we just show you how to assign PM Task to an equipment.
Figure 3 : PM Task
4. If you have already selected a Frequency, click Add PM>> button.
Figure 4 : PM Task
5. Select a PM Task and click SELECT button or just double click on the selected task.
Figure 5 : PM Task
6. Here I repeated procedure 4 and 5 to get four (4) PM Task.
Figure 6 : PM Task
7. You can also recopy PM Task to a similar equipment to avoid assigning again and again. Highlight the equipment and click Copy Equipment PM button.
Figure 7 : PM Task
8. Now select an equipment with similar PM Task to the previous selected equipment and click Store button.
Figure 8 : PM Task
9. Now select an equipment with similar PM Task to the previous selected equipment and click Store button. Here I selected FCU011K... and FCU012K... then, click Accept button.
Figure 9 : PM Task
10. Now click Id column to sort equipment ID in accending order.
Figure 10 : PM Task
11. Now the equipment ID is in accending order. Let's check the PM Task that we recopied the PM Task from equimpment ID FCU099KC111F.
Figure 11 : PM Task
12. Search for equipment ID FCU011KC12F and check if it has same PM Task with equipment ID FCU099KC111F.
Figure 12 : PM Task
13. Search for equipment ID FCU012KC12F and check if it has same PM Task with equipment ID FCU099KC111F.
Figure 13 : PM Task
Developed by Cloudlex Software Solution